answerkeron.blogg.se

#RADIANT HEATERS PORTABLE#

Infrared heater elements are also used in the food industry to maintain food at target temperatures for periods of time. Infrared industrial heating products use tubular heaters that reach high temperatures and radiate sufficient heat from overhead. These industrial heaters are often used in large areas such as arenas, sawmills, ice rinks, gymnasiums, auditoriums, racetracks, parking garages, aircraft hangars and other large areas that require radiant heating. If there are toddlers about, a loop of chain around the top fin tube and attached to a wall could stop a nasty accident if the child tried to pull the heater over.Wattco Infrared radiant heaters are economic, efficient, and clean. Infrared heaters are designed for comfort heating applications that require radiant heat in indoor, outdoor, and exposed areas through direct infrared heat transfer. If a model with narrow exposed fins topples onto a small child, it can do quite a lot of harm. Models with wide flat fins or a casing over the fins, and a protective heat shield at each end are safer.īecause they are tall and narrow, column heaters are inherently less stable than other types. But some models have narrow exposed fins that get quite hot. The relatively low surface temperature makes oil-filled heaters safer than most other heater types. Thermal cutoutĪll models should have a built-in thermal cutout, to turn the heater off if it overheats.

#RADIANT HEATERS PORTABLE#

They’re not mandatory, but we think they’re essential for any portable heater with a radiant element. Tilt switches turn the heater off if it falls over to reduce the risk of fire. Oil-column heaters with nooks and crannies are the most difficult. Cleaning: Heaters that are largely comprised of flat, uninterrupted surfaces are easiest to clean (panel and convector models topped the cleaning test).Thermostat: This maintains a desired average room temperature (as long as it's within the heater's capacity), and should have a control that's easy to read and set.

For others, you can buy a separate drying rack. Some heaters come with a detachable drying rack that spaces the clothes away from the heater.

Clothes drying: Clothes must not be draped over a heater.

Some have a single pair of large wheels at one end, so you have to lift the handle end to move the heater. Some models have 4 castors, others a combination of castors and wheels. There is usually a recessed handle at the control panel end: it should give a good grip. Try moving the heater around in the shop.

Mobility: Oil-filled heaters are heavy and can be difficult to move around because of their size and shape.

You can also have a bedroom heater turn itself off after you've gone to sleep.

Timer: With a timer, you can warm up a living area before you get up in the morning or arrive home from work.

The more heat settings the better – you'll have more flexibility to control the room temperature.

Markings should be easy to read with good contrast. Controls: The controls should be clearly visible, easy to access and easy to use.Cord storage: This allows you to stow the cord neatly when the heater is not in use.Just switch them on for a few minutes, to warm up the room. While noisy, you don't have to use them continuously. Fan: A fan is an effective way to break up the layers of cold and warm air in a room.